QuickTrax® series
- Sturdy 2-component design: hard chain body, flexible film hinge
- Plastic chain links
- Extensive unsupported length
- Inside space is gentle on the cables – no interfering edges
- Very quiet through integrated noise damping
- Quick and easy to open
- Inside/outside openable
- Dividers and height separations for cable separation
- Single-part end connectors with and without integratable strain relief
Features
- Extremely fast and easy cable laying thanks to crossbar with film hinge
- Each chain link consists of two different materials:
– Hard chain body made of glass-fibre reinforced material
– Crossbar with flexible film hinge made of elastic special plastic - Sturdy cable carrier design
- High torsional rigidity
- Very quiet through integrated noise damping
- Extensive unsupported length
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Easy to open …
… even without tools
High side stability
Reliable cable separation
Cable carrier design
Solid plastic cable carriers: chain links and end connectors made of plastic
Each chain link consists of two different materials:
- Hard cable carrier body made of glass fiber-reinforced material
- Flexible lamellae made of elastic plastic
The two-component technology of the QuickTrax®
The two-component technology of the QuickTrax® combines two seemingly incompatible features: Stability and flexibility.
Cable carriers need to be extremely sturdy, with extensive unsupported length. At the same time, cables need to be inserted easily for fast cable laying.
The QuickTrax® meets these requirements thanks to its innovative design and material combination of a hard cable carrier body made from glass fiber-reinforced material and crossbars with a film hinge made from rigid special plastic.
Comparison of dimensions
| Manufacturer | hi [mm] | hG [mm] | t [mm] | Identical connection hole pattern |
|---|---|---|---|---|
| QT0320 | 20 | 25.5 | 32 | yes |
| Competitive product | 17.5 | 23 | 30.5 | yes |
Comparison of bending moment
Comparison of bending strength
Load diagram
for unsupported length depending on additional load
Advantages over competitive product
- 20 % longer unsupported length compared to competitive product
- 33 % greater additional load through use of fiber glass reinforced plastic
- Greater inner height
- Low noise operation due to internal damping system
- High side stability through locking in the stroke system
- Dividers can be used for cable separation
