Call: 800.323.7790 | |  

TKA Series - Chip-Tight Tube

  • Secure cover attachment even under severe stresses (e.g. due to hydraulic cables)
  • Designs with inward or outward opening covers
  • Cable-friendly interior space without sharp edges
  • Cover completely detachable on one side
  • Quick and easy opening from any vantage point
  • Connecting pieces with optional strain relief
  • Dividers and horizontal shelves available
  • Chain links made of glass fibre-reinforced plastic
  • Cover sheet for universal mounting bracket
  • Integrated noise damping system
  • Pin and bore connection and stroke system covered completely

Features

  • Excellent cable protection, even at the brackets
  • Chips and dirt-resistant due to smooth surfaces
  • Increased self-supporting length
  • High torsional rigidity
  • Good inside to outer width ratio
  • Low internal noise emissions
  • Optional: Special material with protection against chips up to 850° C
  • Numerous custom material types for custom applications available
  • Easy assembly
  • Easy cable installation
  • Easy-to-open cover with simultaneously high retention force on the chain link during operation
  • Measurement scale for easy alignment of the dividers along the cover
  • Strain relief can be completely integrated into connecting element
  • TKA55: IP54 tested & attested

Selection criteria for TKA series

  • Where a tight cable carrier is a necessity
  • Where easy one-sided cover opening from any vantage point is desirable (e.g. for cable inspections)
  • Where inside subdivision is desirable
  • Where fixed dividers should be available (e.g. for carriers lying on their side)
  • Where a a long trave gliding cable carrier is required
  • Where the maximum carrier load does not exceed 15kg/m
Type hi
[mm]
Bi
[mm]
t
[mm]
TKA30 20.5 15 – 65 30.5
TKA38 26 25 – 130 38.5
TKA45 36 50 – 150 45.5
TKA55 45 50 – 175 55.5
TKA 30

Stay variants
Stay variant 060
Inside: Quick-to-open cover

Stay variant 080
Outside: Quick-to-open cover

TKA30

Unsupported arrangement

Installation measurements unsupported

KR
[mm]
H
[mm]
Hz
[mm]
LB
[mm]
UB
[mm]
55 139 164 234 100
75 179 204 297 120
95 219 244 359 140
125 279 304 454 170
145 319 344 516 190
180 389 414 626 225

PDF TKA Series Cable Carrier (PDF - 4.01 MB)

Get Adobe Reader

^